Remifentanyl

DIOSYNTH B V -- ORG 9426 ROCURONIUM BROMIDE -- 6850-00F039974
=====================  Product Identification  =====================

Product ID:ORG 9426 ROCURONIUM BROMIDE
MSDS Date:04/24/1991
FSC:6850
NIIN:00F039974
MSDS Number: BXKTP
=== Responsible Party ===
Company Name:DIOSYNTH B V
Box:20
City:5340 BH OSS THE NETHERLANDS
Country:US
Info Phone Num:04120-51333
Emergency Phone Num:04120-51333
CAGE:GO401
=== Contractor Identification ===
Company Name:DIOSYNTH B V
Box:20
City:5340 BH OSS THE NETHERLANDS
Country:--
Phone:04120-51333
CAGE:GO401

=============  Composition/Information on Ingredients  =============

Ingred Name:ROCURONIUM BROMIDE
CAS:119302-91-9

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ABSORPTION THROUGH WOUNDS &/SKIN
    DEFECTS. RESPIRATORY FAILURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:PARALYSIS, VOMITING, APNEA.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: WASH W/WATER & SOAP;
    SHOWER THOROUGHLY. EYES: FLUSH W/WATER FOR 10 MINS. INGESTION:
    INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER, EXTINGUISHING POWDER, CO2, FOAM
Fire Fighting Procedures:EVACUATE PERSONNEL TO SAFE AREA. USE SCBA &
    PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:GROUND MECHANICAL EQUIPMENT IN CONTACT
    W/DRY MATERIAL TO DISSIPATE THE POTENTIAL BUILT UP OF STATIC
    ELECTRICITY AS PREVENTION AGAINST DUST EXPLOSION. (SEE SUPP)

==================  Accidental Release Measures  ==================

Spill Release Procedures:VACUUM/SWEEP UP & TRANSFER INTO AN APPROPRIATE
    CONTAINER FOR WASTE DISPOSAL. AVOID DUST. VENTILATE AREA & WASH
    SITE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AT 35.6-46.4F IN TIGHT
    CONTAINERS PROTECTED FROM LIGHT & MOISTURE.
Other Precautions:AVOID CONTACT W/EYES, SKIN/CLOTHING. AVOID BREATHING
    OF DUST. WHEN GRINDING/MICRONISING MATERIAL A SUPPLIED AIR
    RESPIRATOR (HOOD FIT TYPE) HAS TO BE USED.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:DUSTMASK 3M NO8710.
Ventilation:MECHANICAL (GENERAL)
Protective Gloves:CHEMICAL
Eye Protection:GOGGLES
Other Protective Equipment:WEAR A CLEAN WELL FITTED & CLOSED OVERALL.
    CHANGE DAILY.
Work Hygienic Practices:EATING, DRINKING/SMOKING NEAR MATERIAL IS
    FORBIDDEN.
Supplemental Safety and Health
FIRE HAZARDS CONT'D: EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

==================  Physical/Chemical Properties  ==================

Solubility in Water:COMPLETE
Appearance and Odor:LIGHT-YELLOW/CREAM COLORED AMORPHOUS POWDER W/A
    SLIGHT ODOR

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMPS > -40F, MOISTURE.
Hazardous Decomposition Products:ALLYLBROMIDE

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL ON CHEMICAL WASTE DUMP SITE/INCINERATE
    IAW/FEDERAL, STATE & LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.