BACON INDUSTRIES INC -- ADHESIVE FTA-3 -- 8040-00F029986
===================== Product Identification =====================
Product ID:ADHESIVE FTA-3
MSDS Date:08/26/1992
FSC:8040
NIIN:00F029986
Kit Part:Y
MSDS Number: BRXPL
=== Responsible Party ===
Company Name:BACON INDUSTRIES INC
Address:192 PLEASANT STREET
City:WATERTOWN
State:MA
ZIP:02172-2321
Country:US
Info Phone Num:508-668-6753 OR 714-559-1134
Emergency Phone Num:617-926-2550 OR 714-863-1499
CAGE:99098
=== Contractor Identification ===
Company Name:BACON INDUSTRIES, INC.
Address:192 PLEASANT STREET
Box:City:WATERTOWN
State:MA
ZIP:02172
Country:US
Phone:617-926-2550
CAGE:99098
============= Composition/Information on Ingredients =============
Ingred Name:BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,
ARALDITE 6004, 4,4'-ISOPROPYLIDENEDIPHENOL-EPICHLOROHYDRIN
CAS:25068-38-6
RTECS #:KD4380000
Fraction by Wt: 74%
Ingred Name:N-BUTYL GLYCIDYL ETHER
CAS:2426-08-6
RTECS #:TX4200000
Fraction by Wt: 12%
Other REC Limits:25 PPM
OSHA PEL:50 PPM
ACGIH TLV:25 PPM; 9293
Ingred Name:SILICON DIOXIDE, CELITE 322
CAS:7631-86-9
RTECS #:VV3100000
Fraction by Wt: 14%
OSHA PEL:80 MG/CUM
ACGIH TLV:0.2 MG/CUM
Ingred Name:EPICHLOROHYDRIN, CHLOROMETHYLOXIRANE (SUSPECTED HUMAN
CARCINOGEN BY ACGIH, IARC, & NTP)
CAS:106-89-8
RTECS #:TX4900000
Other REC Limits:2 PPM
OSHA PEL:S, 5 PPM
ACGIH TLV:S, 2 PPM; 9293
EPA Rpt Qty:100 LBS
DOT Rpt Qty:100 LBS
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50 (RAT): 9 G/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGESTION: SLIGHTLY TOXIC. INHALATION:
RESPIRATORY IRRITATION. SKIN: MODERATE INJURY. MAY CAUSE ALLERGIC
REACTION. EYES: IRRITATION & REDNESS.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: HEADACHE, NAUSEA, DIZZINESS. SKIN:
REDDENING & SWELLING. EYES: IRRITATION & REDNESS.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN DISORDERS &
ALLERGIES.
======================= First Aid Measures =======================
First Aid:EYES: FLUSH W/WATER FOR AT LEAST 30 MINS. SKIN: WASH
THOROUGHLY W/SOAP & WATER. DON'T USE SOLVENTS. INHALATION: REMOVE
TO FRESH AIR. IF BREATHING HAS STOPPED, GIVE ARTIFICIAL
RESPIRATION. KEEP AFFECTE D PERSON WARM & AT REST. INGESTION: NO
SPECIFIC ANTIDOTE. TREATMENT BASED ON JUDGEMENT OF THE PHYSICIAN IN
RESPONSE TO THE REACTIONS OF THE PATIENT. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
===================== Fire Fighting Measures =====================
Flash Point Method:SCC
Flash Point:164F
Extinguishing Media:WATER FOG, CO2, DRY CHEMICAL OR ALCOHOL FOAM.
Fire Fighting Procedures:WEAR POSITIVE SELF CONTAINED BREATHING
APPARATUS & FULL PROTECTIVE CLOTHING. KEEP NON-IGNITED MATERIAL
COOL W/WATER SPRAY.
Unusual Fire/Explosion Hazard:BEWARE OF POSSIBLE EXOTHERMIC REACTION IF
THE MATERIAL IS HEATED >400F IN A CONTAINER >1 GALLON OF MATERIAL.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE IGNITION SOURCES. WEAR PROTECTIVE
EQUIP. LARGE SPILLS: DIKE/PUMP INTO APPROPRIATE CONTAINERS. SMALL
SPILLS: SOAK UP IN AN INERT ABSORBENT. REMOVE RESIDUAL RESIN BY
USING HOT SOAPY WATER. PLA CE WASTE IN AN APPROVED METAL CONTAINER&
SEAL.
====================== Handling and Storage ======================
Other Precautions:AVOID EYE & SKIN CONTACT. DON'T WEAR CONTACT LENSES
WHILE USING OR IN THE VICINITY IN WHICH THIS PRODUCT IS BEING USED.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF TLV'S ARE EXCEEDED USE A NIOSH ORGANIC FUME
RESPIRATOR. USE A SCBA WHEN IN POORLY VENTILATED AREAS OR AREAS
WHICH HAVE A EXTREMELY HIGH VAPOR CONCENTRATION. USE A NIOSH
APPROVED PARTICULATE RESPIRA TOR WHEN CURED MATERIAL IS
MACHINED/CUT.
Ventilation:LOCAL. VENT CURING OVENS OUTDOORS.
Protective Gloves:IMPERVIOUS LATEX OR RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:CLEAN BODY-COVERING CLOTHING. EYE WASH
FACILITY & SAFETY SHOWER.
Work Hygienic Practices:CLOTHING CONTAMINATED W/MATERIAL SHOULD BE
WASHED BEFORE REUSING. SEVERELY CONTAMINATED CLOTHING SHOULD BE
DISCARDED.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
Vapor Pres:1
Vapor Density:4.5
Spec Gravity:1.16
Evaporation Rate & Reference:(BU AC = 1): <1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER PASTE W/ETHER ODOR.
Percent Volatiles by Volume:0%
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
UNCONTROLLED EXPOSURE TO STRONG OXIDIZING AGENTS, ACIDS, MERCAPTANS,
BASES OR AMINES, ESPECIALLY IN OVER 1 LB MASSES.
Stability Condition to Avoid:EXCESSIVE HEAT OVER LONG PERIODS OF TIME
WILL DEGRADE RESIN.
Hazardous Decomposition Products:NITROGEN OXIDES, CO2, CO, ALDEHYDES &
OTHER HAZARDOUS ORGANICS.
Conditions to Avoid Polymerization:MAY OCCUR IF STORED AT AN ELEVATED
TEMPERATURE >400F, ESPECIALLY IN QUANTITIES GREATHER THAN 1 LB.
==================== Disposal Considerations ====================
Waste Disposal Methods:INCINERATE AT A U.S. EPA PERMITTED WASTE
FACILITY &/OR BURIAL IN AN EPA SECURED LANDFILL. OBSERVE ALL
APPLICABLE FEDERAL, STATE & LOCAL REGS. DON'T CONTAMINATE LAKES,
STREAMS, PONDS OR UNDERGROUND WAT ER SUPPLIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.