Nemurel

PREMIER INDUSTRIAL CORP -- 93215, ALL PURPOSE ETP CUTTING FLUID -- 9150-00N032548
=====================  Product Identification  =====================

Product ID:93215, ALL PURPOSE ETP CUTTING FLUID
MSDS Date:08/28/1989
FSC:9150
NIIN:00N032548
MSDS Number: BPTBL
=== Responsible Party ===
Company Name:PREMIER INDUSTRIAL CORP
Address:4500 EUCLID AVE
City:CLEVELAND
State:OH
ZIP:44103
Country:US
Info Phone Num:216-391-8300
Emergency Phone Num:216-391-8300
Preparer's Name:G.F.S
CAGE:18399
=== Contractor Identification ===
Company Name:PREMIER FARNELL CORPORATION
Address:4500 EUCLID AVENUE
Box:City:CLEVELAND
State:OH
ZIP:44103-3736
Country:US
Phone:216-391-8300
CAGE:18399

=============  Composition/Information on Ingredients  =============

Ingred Name:ING 1: HYDROTREATMENT); (PETROLEUM OIL).
    LD50:(ORAL,RAT)13000 MG/KG
RTECS #:9999999ZZ

Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY
    NAPHTHENIC (MILD OR NO SOLVENT-REFINING OR (ING 2)
CAS:64742-63-8
RTECS #:PY8038000
Fraction by Wt: 65%
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5MG/M3;10 STEL(MIST)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:SEE INGREDIENT 1
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:PRODUCT IS NOT A PRIMARY SKIN OR EYE
    IRRITANT. CHRONIC IRRITATION MAY OCCUR AFTER PROLONGED AND REPEATED
    CONTACT WITH SKIN.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYE: IMMED FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES
    & CALL PHYSICIAN. SKIN: WASH THOROUGHLY WITH PLENTY OF SOAP AND
    WATER. INHAL: REMOVE TO FRESH AIR. INGEST: SEEK PHYS IMMED. SHOW
    MSDS OR L ABEL, DO NOT INDUCE VOMITING.

=====================  Fire Fighting Measures  =====================

Flash Point:450F,232C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CLEAN UP WITH ABSORBENT MATERIAL. DISPOSE OF
    AS A NON-HAZARDOUS WASTE. CONTAIN AND PICK-UP WASTE MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID PRLNG/RPTD CONT W/SKIN. ALWAYS
    READ & FOLLOW DIRECTONS ON PRODUCT LABEL.
Other Precautions:IN CASE OF ACCIDENT/ILLNESS, SEEK PHYS IMMED, SHOW
    LBL/ MSDS. KEEP OUT OF REACH OF CHILDREN. ADDNL TECH DATA SHEETS
    &/OR MATL SFTY DATA SHEETS ARE AVAIL UPON REQUEST. FOR PROFESSIONAL
    & INDUSTRIAL USE  ONLY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE ONLY WITH ADEQUATE VENTILATION. USE
    NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
    .
Ventilation:LOCAL: RECOMMENDED. MECH:REQUIRED.
Protective Gloves:SOLVENT RESISTALT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AVOID PROLONGED OR REPEATED CONTACT WITH
    SKIN.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:V6
Boiling Pt:B.P. Text:680F,360C
Vapor Pres:NIL
Spec Gravity:0.99
Evaporation Rate & Reference:<0.1(H2O=1)
Solubility in Water:NIL
Appearance and Odor:TAN OPAQUE FLUID, W/PETROLEUM ODOR.
Percent Volatiles by Volume:NIL

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:KEEP AWAY FROM HEAT AND FLAME.
Hazardous Decomposition Products:PYROLYSIS PRODUCTS. CO, CO2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF WASTES IN ACCORDANCE WITH FEDERAL,
    STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.